Polyvinyl alcohol/gelatin hydrogels regulate cell adhesion and chromatin accessibility.

Cell adhesion has a critical influence on various processes such as cancer metastasis and wound healing. Many substrates have been used for studying cell adhesion and its related biological processes, it is still highly desirable to have a simply prepared and low-cost substrate suitable for regulating cell adhesion. In this study, we produced a series of polyvinyl alcohol/gelatin hydrogels with different gelatin concentrations via dry-annealing method. Our data showed that the protein adsorbing capability was enhanced and cell adhesion area and the ratio of non-spherical cells were increased with the increment of gelatin concentration. We also observed that varying cell adhesion conditions induced by polyvinyl alcohol /gelatin hydrogels resulted in expression level changes of genes involved in mechanotransduction from extracellular matrices (ECM) to the nucleus. In particular, we detected a widespread increase in chromatin accessibility under poor cell adhesion condition. This work provides a useful hydrogel system for regulating cell adhesion and opens up new possibilities for the design of biomaterials for cell adhesion study.

Uniaxial Cyclic Stretching Promotes Chromatin Accessibility of Gene Loci Associated With Mesenchymal Stem Cells Morphogenesis and Osteogenesis.

It has been previously demonstrated that uniaxial cyclic stretching (UCS) induces differentiation of mesenchymal stem cells (MSCs) into osteoblasts in vitro. It is also known that interactions between cells and external forces occur at various aspects including cell-matrix, cytoskeleton, nucleus membrane, and chromatin. However, changes in chromatin landscape during this process are still not clear. The present study was aimed to determine changes of chromatin accessibility under cyclic stretch. The influence of cyclic stretching on the morphology, proliferation, and differentiation of hMSCs was characterized. Changes of open chromatin sites were determined by assay for transposase accessible chromatin with high-throughput sequencing (ATAC-seq). Our results showed that UCS induced cell reorientation and actin stress fibers realignment, and in turn caused nuclear reorientation and deformation. Compared with unstrained group, the expression of osteogenic and chondrogenic marker genes were the highest in group of 1 Hz + 8% strain; this condition also led to lower cell proliferation rate. Furthermore, there were 2022 gene loci with upregulated chromatin accessibility in 1 Hz + 8% groups based on the analysis of chromatin accessibility. These genes are associated with regulation of cell morphogenesis, cell-substrate adhesion, and ossification. Signaling pathways involved in osteogenic differentiation were found in up-regulated GO biological processes. These findings demonstrated that UCS increased the openness of gene loci associated with regulation of cell morphogenesis and osteogenesis as well as the corresponding transcription activities. Moreover, the findings also connect the changes in chromatin accessibility with cell reorientation, nuclear reorientation, and deformation. Our study may provide reference for directed differentiation of stem cells induced by mechanical microenvironments.

Predicting cell viability within tissue scaffolds under equiaxial strain: multi-scale finite element model of collagen-cardiomyocytes constructs.

Successful tissue engineering and regenerative therapy necessitate having extensive knowledge about mechanical milieu in engineered tissues and the resident cells. In this study, we have merged two powerful analysis tools, namely finite element analysis and stochastic analysis, to understand the mechanical strain within the tissue scaffold and residing cells and to predict the cell viability upon applying mechanical strains. A continuum-based multi-length scale finite element model (FEM) was created to simulate the physiologically relevant equiaxial strain exposure on cell-embedded tissue scaffold and to calculate strain transferred to the tissue scaffold (macro-scale) and residing cells (micro-scale) upon various equiaxial strains. The data from FEM were used to predict cell viability under various equiaxial strain magnitudes using stochastic damage criterion analysis. The model validation was conducted through mechanically straining the cardiomyocyte-encapsulated collagen constructs using a custom-built mechanical loading platform (EQUicycler). FEM quantified the strain gradients over the radial and longitudinal direction of the scaffolds and the cells residing in different areas of interest. With the use of the experimental viability data, stochastic damage criterion, and the average cellular strains obtained from multi-length scale models, cellular viability was predicted and successfully validated. This methodology can provide a great tool to characterize the mechanical stimulation of bioreactors used in tissue engineering applications in providing quantification of mechanical strain and predicting cellular viability variations due to applied mechanical strain.

Mechanical characterization of bioprinted in vitro soft tissue models.

Recent development in bioprinting technology enables the fabrication of complex, precisely controlled cell-encapsulated tissue constructs. Bioprinted tissue constructs have potential in both therapeutic applications and nontherapeutic applications such as drug discovery and screening, disease modelling and basic biological studies such as in vitro tissue modelling. The mechanical properties of bioprinted in vitro tissue models play an important role in mimicking in vivo the mechanochemical microenvironment. In this study, we have constructed three-dimensional in vitro soft tissue models with varying structure and porosity based on the 3D cell-assembly technique. Gelatin/alginate hybrid materials were used as the matrix material and cells were embedded. The mechanical properties of these models were assessed via compression tests at various culture times, and applicability of three material constitutive models was examined for fitting the experimental data. An assessment of cell bioactivity in these models was also carried out. The results show that the mechanical properties can be improved through structure design, and the compression modulus and strength decrease with respect to time during the first week of culture. In addition, the experimental data fit well with the Ogden model and experiential function. These results provide a foundation to further study the mechanical properties, structural and combined effects in the design and the fabrication of in vitro soft tissue models.

Three dimensional multi-scale modelling and analysis of cell damage in cell-encapsulated alginate constructs.

One of the major challenges in scaffold guided regenerative therapies is identifying the essential cues such as mechanical forces that induce cellular responses to form functional tissue. Developing multi-scale modelling methods would facilitate in predicting responses of encapsulated cells for controlling and maintaining the cell phenotype in an engineered tissue construct, when mechanical loads are applied. The objective of this study is to develop a 3D multi-scale numerical model for analyzing the stresses and deformations of the cell when the tissue construct is subjected to macro-scale mechanical loads and to predict load-induced cell damage. Specifically, this methodology characterizes the macro-scale structural behavior of the scaffold, and quantifies 3D stresses and deformations of the cells at the micro-scale and at a cellular level, wherein individual cell components are incorporated. Assuming that cells have inherent ability to sustain a critical load without damage, a damage criterion is established and a stochastic simulation is employed to predict the percentage cell viability within the tissue constructs. Bio-printed cell-alginate tissue constructs were tested with 1%, 5% and 10% compression strain applied and the cell viability were characterized experimentally as 23.2+/-16.8%, 9.0+/-5.4% and 4.6+/-2.1%. Using the developed method, the corresponding micro-environments of the cells were analyzed, the mean critical compressive strain was determined as 0.5%, and the cell viability was predicted as 26.6+/-7.0, 13.3+/-4.5, and 10.1+/-2.8. The predicted results capture the trend of the damage observed from the experimental study.

Characterization of cell viability during bioprinting processes.

Bioprinting is an emerging technology in the field of tissue engineering and regenerative medicine. The process consists of simultaneous deposition of cells, biomaterial and/or growth factors under pressure through a micro-scale nozzle. Cell viability can be controlled by varying the parameters like pressure and nozzle diameter. The process itself can be a very useful tool for evaluating an in vitro cell injury model. It is essential to understand the cell responses to process-induced mechanical disturbances because they alter cell morphology and function. We carried out analysis and quantification of the degree of cell injury induced by bioprinting process. A parametric study with different process parameters was conducted to analyze and quantify cell injury as well as to optimize the parameters for printing viable cells. A phenomenological model was developed correlating the percentage of live, apoptotic and necrotic cells to the process parameters. This study incorporates an analytical formulation to predict the cell viability through the system as a function of the maximum shear stress in the system. The study shows that dispensing pressure has a more significant effect on cell viability than the nozzle diameter. The percentage of live cells is reduced significantly (by 38.75%) when constructs are printed at 40 psi compared to those printed at 5 psi.